SPL Phantom DK2-340 - S1 Series Subwoofers; S1-10 L Specifications; S1-12 L Specifications; S1-15 L Specifications

9
S1SERIES
SUBWOOFER
S1-10L

•800wattspowerhandling
•300wattsRMS
•70oz.Magnet
•1.5”BASVAluminumVoiceCoil
•Fs:36Hz
•Vas:1.2cu.ft.
•Qes:.858
•Qms:9.718
•Qts:.788
•Xmax:.2”
•SPL:84.7dB
•MountingDepth:4.625”
•RecommendedBoxTypeS/P
S=Sealed/P=Ported/BP=Bandpass
Adequate engineering, style and performance are taking over the S1 Series sub-
woofers. Bringing performance to an economic package is difficult, but we think
we covered all the bases here. Discrete mount terminals help you create great
installs, stylish grey coated PP cone and matching dust cap give you uniformity
and large magnets with BASV voice coils allow you to rock in style. These woofers
work great in sealed and ported enclosures with minimal power consumption and
are available in dual 4 ohm coils and in three popular sizes - 10”, 12” and 15”
sizes.
S1-12L

•900wattspowerhandling
•350wattsRMS
•70oz.Magnet
•1.5”BASVAluminumVoiceCoil
•Fs:29Hz
•Vas:3.86cu.ft.
•Qes:.601
•Qms:9.120
•Qts:.564
•Xmax:.2”
•SPL:88dB
•MountingDepth:5.0625”
•RecommendedBoxTypeS/P
S=Sealed/P=Ported/BP=Bandpass
S1-15L

•1000wattspowerhandling
•400wattsRMS
•70oz.Magnet
•1.5”BASVAluminumVoiceCoil
•Fs:27Hz
•Vas:6.85cu.ft.
•Qes:.906
•Qms:9.182
•Qts:.825
•Xmax:.2”
•SPL:88dB
•MountingDepth:6.25”
•RecommendedBoxTypeS/P/BP
S=Sealed/P=Ported/BP=Bandpass
UDV Coated PP CONE
DUAL 4 Ohm COILS
DISCRETE MOUNT TERMINALS