×4
RINSE WRING
AUTO
90°
3,5 L
!
1
2 3 4
5
Fill the clean water
compartment with just water
or add your usual detergent
(follow the detergent’s dosage
instructions) up to the MAX
level, pop on the lid and then
put it back in the main bucket.
Place the mop on
the pump and push
down the handle
until you hear
the click.
With the handle unlocked, push down
and pull up the handle to dampen or
rinse the mop. When the mop comes
up automatically, wring as required
repeating the same gesture.
Tilt the mop slightly to
unplug it. Adjust the
height of the handle
and lock it in place.
Pull the handle
towards you and
you’ll then be ready
to mop!
To Next Page
Loading...
