Need help?Do you have a question about the Sporty's Air-Scan® V and is the answer not in the manual?
General| Channels | 200 |
|---|---|
| Channel Spacing | 25 kHz |
| Scan Rate | 50 channels per second |
| Battery Life | Up to 12 hours |
| Display | LCD |
| Type | Aviation Scanner |
Explains legal aspects of using scanning receivers and potential penalties for misuse.
Provides steps for installing batteries, powering on, selecting bands, and entering frequencies.
Details storing frequencies and activating the exclusive Aviation Interrupt function.
Explains the procedure to clear all saved memory channels from the device.
Introduces the manual's scope and the device's purpose as a scanner with AM/FM/Aviation radio.
Lists the main functionalities and specifications of the scanner, including Aviation Interrupt.
Outlines the terms and conditions of the product's limited warranty and service procedures.
Provides essential safety warnings and handling instructions to prevent damage or hazards.
Describes the functions of buttons and knobs on the front of the scanner.
Details the earphone jack connection on the right side of the unit.
Identifies DC adapter input, speaker, and battery cover locations.
Guides users on how to manually tune to specific AM, FM, or Aviation frequencies.
Explains how to automatically scan through frequency ranges to find active broadcasts.
Instructions for saving favorite frequencies into memory channels.
Details how to retrieve saved frequencies from memory channels.
Describes how to scan only the stored memory channels for activity.
Details on clearing individual or all memory channels.
Explains the exclusive feature to prioritize aviation transmissions over AM/FM.
How to activate and deactivate the exclusive Aviation Interrupt™ feature.
Explains the low battery indicator displayed on the screen.
Instructions for activating the scanner's screen lighting.
Instructions for activating or deactivating audible key press feedback.
Lists the frequency ranges for Aviation, AM, and FM bands.
Information on memory channels and the device's weight with/without batteries.
Provides height, width, depth, and operating temperature range of the scanner.
Details power requirements and receiver performance metrics like audio output.
Technical specifications for signal reception quality.
Technical specifications for channel separation.
Specifies the current draw of the device under different operating conditions.
To Next Page
