Choose *Photo, Video, or Photo & Video.
Photo or Photo & Video mode: choose the image size,
*5M(original), 8M, or 24M
Photo mode: *1, 2, 3, 4, 5, 10 photos
Photo & Video: *1, 2, 3 photos
*Short, 1 sec, 2 sec, 3 sec (when Burst set to 2 or more)
Video Size: 720P, *1080P, 1440P
Video Length: 5, *10, 15, 30 sec, 1 min
Camera start to work at preset Date and Time
Select High, *Normal,Low, or Off.
The sleep time after each trigger. *0 sec, 5-55 sec
in 5 sec intervals, 1-60 min in 1-min intervals
*All Day, User. When User is selected, the camera
can be set to operate during one or two specific
time periods instead of all day. Enter the hour and
minutes for one or both plans (start-stop times). For
each plan, set the trigger interval and time lapse
interval. The plan settings override all other general
camera settings. If you use both plans, make sure
that you do not program times that overlap.
*Off; 30, 35, 40, 45, 50, 55 secs.
1, 5, 10, 15, 20, 30 min;
1, 2, 3, 4, 5, 6, 7, 8, 12, 24 hr
The camera will take pictures at the specified time
interval. Note that in Time Lapse mode, the
camera will take motion-triggered photos unless
Sensitivity is set to OFF.
Time Lapse Plan: *All Day, one start-stop time for
time lapse
AllDays: *Yes, No. If set to NO, set to YES each
day the camera should work.
To Next Page
Loading...
