Spromise S688 - Menu Settings and Configuration; Camera Settings; Trigger Settings

6
17. Push the power switch to the OFF position to power off the camera.
Please note that even in the OFF mode, the camera still consumes a
small amount of battery power. Therefore, please remove the batteries
if the camera is not in use for an extended time.
Menu Settings
Switch the camera to SETUP mode & press MENU. Press ▲▼◄► to
select the desired value, And then press OK to save.
Setting Items
Description
Camera
Mode
Choose to take Photo / Video/Photo&Video
Photo Size
Choose the image size, e.g. 3MP, 5MP,
8MP, 10MP ,12MP or 24MP.
Photo Burst
Choose the number of images taken after
each trigger (1-10).
Burst
Interval
Choose the interval time length between the
images taken in burst mode (Short 1/2/3s).
Video Size
Choose the video resolution.
Video Length
Set the video length to the desired duration.
Sound
Enable or disable video sound recording.
Trigger
Sensitivity
Select between High,Normal,Low,and OFF.
Trigger
Interval
The sleeping time after each trigger.