SPT SU-1053 - Troubleshooting; Common Troubleshooting Issues; End-of-the-Season Care and Storage; Technical Specifications

TROUBLESHOOTING
A. No power to the unit when turned on.
"Check if the DC adaptor is securely plugged to the unit and the wall outlet.
"Check the electrical outlet with a working appliance.
B. Power to unit, but not producing mist.
° Turn unit OFF. Remove bottle and re-insert, making sure the Adaptor Cap is properly fitted.
C. Mist is stuck inside the nozzle.
e Sometimes water droplets may block the Mist Outlet. Turn unit OFF, remove the nozzle and
dry the outlet area.
D. Humidifier is overflowing.
"Turn unit OFF. Remove bottle and check the Adaptor Cap is properly fitted on the bottle.
«When placing the bottle onto the unit, do not squeeze to bottle to force water into the unit.
"Once the bottle is properly fitted onto the unit, do not move the bottle — this will cause
more water to be released into the unit.
END-OF-THE-SEASON CARE AND STORAGE
* Follow WEEKLY CLEANING instructions when the
humidifier will not be used for at least a week or more,
or at the end of the season.
* Dry the humidifier and all accessories completely before
storing. DO NOT store with water or any moisture inside
the humidifier.
* Pack the unit in its original carton and store in a cool,
dry location.
* Before next use, remember to clean the humidifier.
TECHNICAL SPECIFICATIONS
Model SU-1053
Length 4.33 in
Width 2.56 in
Height 3in
Weight 0.91 Ibs
Input Voltage/W 100~240 volts AC, 50~ 60Hz, 15W
(6)