4
HOW THE i4 WORKS
The Spyder i4 Battery Case has an advanced 2000 mAh A-grade Lithium-Ion
Polymer battery cell, which is very similar to the one in your iPhone. The i4
has intelligent circuitry that can detect your iPhone's battery level and charge
it as required. The i4 can recharge your iPhone while you use it, so you may
never have to suffer down time. The i4 is also equipped with a thermal sensor
which prevents the battery cell from overheating, and an automatic power
cut-off that prevents short-circuiting.
Go to spyderstyle.com for all of the powerful details.
CONNECTING AN iPHONE TO YOUR i4
Your Spyder i4 Battery Case came from the factory almost fully charged, so
you can connect your iPhone and begin using it right away (see illustration,
next page).
1. Slide out the cowling.
2. Slide your iPhone all the way into the case.
3. Align the rails of the cowling with the grooves in the case and slide the
cowling back in until it locks into place.
To Next Page
Loading...