INTERIOR SWITCHES
4-24
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4-WHEEL DRIVE SWITCH*
4-WHEEL DRIVE SWITCH
Driving Mode Change
2H ⇔ 4H
• Automatic Transmission Equipped Vehicle
Stop the vehicle on a level ground and place the gear selector
lever into the “N” position. Turn the switch to the desired position
while depressing the brake pedal.
• Manual Transmission Equipped Vehicle
Stop the vehicle on a level ground and place the shift lever into
the “Neutral” position. Turn the switch to the desired position
while depressing the clutch pedal.
Shifting is possible while driving at the speed of 70 km/h or less.
2H, 4H ⇔ 4L
• Do not drive your
vehicle over 80 km/h
in 4H mode.
NOTICE
Only for part time TC, not
available for 2-wheel drive
vehicle and all wheel drive
vehicle.
Select a proper driving
mode according to the
road conditions.
2H : 2-Wheel Drive
Rear wheel high speed driving mode. Use this mode
for normal or high speed driving on a public road or
highway.
4H : 4-Wheel Drive, High
Use this position on wet or slippery roads such as
sandy, muddy or snow covered roads.
4L : 4-Wheel Drive, Low
Use this position for maximum traction.
All Wheel Drive*
AWD stands for the full-time 4WD system.
AWD reduces wheel slippage and provides greater
driver control over the vehicle. AWD automatically
splits the torque between the front (40%) and rear
(60 %) wheels.
04-Interior Switches.p65 2006-05-17, ¿ÀÈÄ 12:58Page 24 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
