SSANGYONG STAVIC User Manual

9-12
Auto Button And Temperature Control Switch
When you press Auto button, the “AUTO” indicator is displayed
on the VFD and the temperature of the passenger compartment
is automatically maintained according to the set temperature.
To adjust the temperature and fan speed, turn the switch as
required. When you press Auto button during manual operation
mode, the system is changed to Auto operation mode.
OFF Switch
To stop the air conditioner operation,
press this switch.
Low fan speed
Ambient Temperature Display Button
When you press this button, the “OUTSIDE” indicator appears
and the ambient temperature is displayed on the VFD for
about 5 seconds.
High fan speed
Fan Speed Control Switch
To control the fan speed, turn this switch. When turning this switch in Auto mode,
the “AUTO” indicator goes out and the system is changed to manual mode.
Cool
Hot
If the air conditioner switch is turned off, the air conditioner does not work even when
the fan switch is operated. However, the air flows due to fan operation.
CAUTION
The ambient temperature may not display the actual ambient tem-
perature due to engine heat or ground heat.
CAUTION
A120_RHD_09_Air Conditioning System.p65 2006-10-02, ¿ÀÀü 11:06Page 12 Adobe PageMaker 6.5K/Win

SSANGYONG STAVIC Specifications

General

Brand	SSANGYONG
Model	STAVIC
Category	Automobile
Language	English