Need help?Do you have a question about the Ssl EV Series and is the answer not in the manual?
Lists items included in the amplifier package: amplifier, remote control, high input cable, and mounting screws.
Explains the amplifier's ability to operate efficiently at 2 Ohm loads, noting increased output and current draw.
Provides essential safety and handling instructions before installation and use of the amplifier.
Advises on careful planning and execution during amplifier installation, especially around vehicle systems.
Step-by-step guide for securely installing the amplifier in a vehicle, ensuring proper air circulation.
Details preferred RCA input wiring for best audio performance, emphasizing high-quality cables.
Provides a step-by-step guide for power, remote, and signal connections, including fuse installation.
Warns against mistaking the input level control for a volume control to prevent distortion.
Explains preferred RCA input wiring for mono block and multi-channel amplifiers.
Details using speaker outputs from head unit when RCA outputs are unavailable.
Illustrates high-level input and power/speaker wiring for EV1500M and EV2500M models.
Diagrams for connecting 2-channel amplifiers in stereo and bridged modes.
Wiring diagrams for 4-channel amplifiers in stereo and bridged subwoofer modes.
Wiring configurations for EV1500M and EV2500M amplifiers in mono block mode.
Addresses common symptoms like no power, protection LED, or distorted sound with possible remedies.
Details RMS power, max power, impedance, THD, frequency response, and dimensions for 2-channel models.
Lists specifications for 4-channel and mono block models, including power, impedance, and dimensions.
Lists items included in the amplifier package: amplifier, remote control, high input cable, and mounting screws.
Explains the amplifier's ability to operate efficiently at 2 Ohm loads, noting increased output and current draw.
Provides essential safety and handling instructions before installation and use of the amplifier.
Advises on careful planning and execution during amplifier installation, especially around vehicle systems.
Step-by-step guide for securely installing the amplifier in a vehicle, ensuring proper air circulation.
Details preferred RCA input wiring for best audio performance, emphasizing high-quality cables.
Provides a step-by-step guide for power, remote, and signal connections, including fuse installation.
Warns against mistaking the input level control for a volume control to prevent distortion.
Explains preferred RCA input wiring for mono block and multi-channel amplifiers.
Details using speaker outputs from head unit when RCA outputs are unavailable.
Illustrates high-level input and power/speaker wiring for EV1500M and EV2500M models.
Diagrams for connecting 2-channel amplifiers in stereo and bridged modes.
Wiring diagrams for 4-channel amplifiers in stereo and bridged subwoofer modes.
Wiring configurations for EV1500M and EV2500M amplifiers in mono block mode.
Addresses common symptoms like no power, protection LED, or distorted sound with possible remedies.
Details RMS power, max power, impedance, THD, frequency response, and dimensions for 2-channel models.
Lists specifications for 4-channel and mono block models, including power, impedance, and dimensions.
To Next Page
General
