Touch Screen Operation
BT Operation
1. Pairing and Connecting
Prior to using the BT device named SSL as a hands-free system for a BT-enabled
mobile phone for the first time, you must as follows:
Press the BT hands-free icon or press the
pair button on the remote control to turn to
BT standby mode as right:
* Prior to pairing and connecting, when displaying No Video interface of radio, CD,
AUX IN or bluetooth music, the logo BT flashes in the touch screen.
* During the use of the BT device named SSL” as a hands-free system for a
BT- enabled mobile phone;
Switch on the BT mode of your mobile phone; then s BT
device and enter it; BT device car
, select it and enter it; then it will show an interface that
asks to input a password, input 8888 and enter it; then i
with the BT device SSL of the car A/V system, Confirm it, then the frame of the
BT logo will light all the time.
* finishing pairing and ing
or the mobile phone
plays music
2. BT PHONE
1) Make a call
(1) Dial with mobile phone directly;
(2)
a. Touch the HANDSFREE icon in home menu or touch the icon during playing
to turn to BT PHONE interface as follows:
pair and connect them
"
elect the item to find a
When it finds the of the A/V system, the name
SSL will be displayed
t will pair and connect
When connect , the audio of the mobile phone transfers
to the car audio system whenever a call is made or received
.
Dial with BT Phone, remote control, or on touch screen;
: Same as MUTE button.
& : Same as VOL+ and VOL- or
VOL knob.
: Tap to do disconnection.
To Next Page
Loading...