SSP Professional Lighng
www.sspworld.com
2
I. GENERAL DESCRIPTIONS
Thank you for purchasing our products again. To optimize the performance of this unit, please read
these operating instructions carefully to familiarize yourself with the basic operations. This unit has
been tested at the factory before being shipped to you, there is no assembly required. Its features
include:
• 48 DMX control channels
• 96 chaser programs
• 2 Independent cross-faders access to control all channels
• 3 Digit LCD display
• Digital technology adopted
• Power failure memory
• Standard MIDI and DMX ports
• Powerful program edit
• Various running type
• More programs can run synchronously
Please keep this manual on a safety place after reading, so that you may consult it for further in-
formation in the future.
II WARNINGS
1.To prevent or reduce the risk of electrical shock or re, do not expose this unit to rain or mois-
ture.
2.Clearing memory often may cause damage to the memory chip, be careful not to initialize your
unit frequency often to avoid this risk.
3.Only use the recommended AC/DC power adaptor.
4.Be sure to save the packing carton in case you may ever have to return the unit for service.
5.Do not spill other liquids or water in to or on to your amplier.
6.Be sure that the local power outlet match that or the required voltage for your amplier.
7.Do not attempt to operate this unit if the power cord has been frayed or broken. Please route
your power cord out of the way of foot trafc.
8.Do not attempt to remove or break off the ground prong from the electrical cord. This prong is
used to reduce the risk of electrical shock and re in case of an internal short.
To Next Page
Loading...