SSS Siedle Classic SET CLAB 850-1 - Page 8

8
English
Terminal assignment AIB150-…
Ta, Tb In-Home bus
ERT Storey call button
Terminal assignment SNG850-…
L1, N Power connection
Ta, Tb In-Home bus
b, c Power supply 12VAC
Tö, Tö Relay contact door
release
Li, Li Relay contact light
Terminal assignment LNG600-…
L1, N Power connection
+, - Voltage 30VDC
Terminal assignment
BVPC850-…
TaM, TbM In-Home bus monitor
branch
ERT, ETb Storey call button
+M, -M Supply voltage
20–30VDC
S1, S1 Potential-free contact
15VAC, 30VDC, 1A
Commissioning
Simple commissioning using
Plug+Play programming.
Upgrade capability
The set can be extended with further
components. The overall extension
of the set must not exceed 10users,
whereby one door station supports
two users.
Application
Siedle Classic audio set in bus tech-
nology with the functions calling,
speech and door release.
Number of call buttons: 1-4
Siedle Classic video set in bus tech-
nology with the functions calling,
speech, vision and door release.
Number of call buttons: 1-2
Performance features SNG850-…
• 10 bus addresses for supplying the
bus users
• Integrated door release and light
contact
• Programming: manual, Plug+Play
or via BPS650-… (Windows
PC) with ZBVG650-… and
PRI602-…USB
Electrical voltage
•
Mounting, installation and ser-
vicing work on electrical devices may
only be performed by a suitably
qualied electrician. Failure to
observe this regulation could result
in the risk of serious damage to
health or fatal injury due to electric
shocks.
• Operation at an altitude of up to
2000m above sea level.
• Observe EN 62368-1! In a building
installation, an all-pole mains switch
with a contact opening of at least
3mm must be provided. The device
must not be exposed to water drops
or sprayed water! Sufcient ventila-
tion must be ensured. Pay particular
attention to ensure that ventilation
slots are not covered.
• When using stranded cores as
cable material, these must be tted
with wire end ferrules without fail.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device. Direct contact with the circuit
board must therefore be avoided.
Scope of supply SETCLAB850-x
• FCLA0xB-…
• GUCL0x-…
• 1-4AIB150-…
• SNG850-…
• This product information
Scope of supply SETCLVP850-x
• FCLV1300xB-…
• GUCL0x-…
• 1-2BVPC850-…W
• SNG850-…
• LNG600-…
• This product information
Mounting
Mounting instructions can be found
in the production information for
the individual devices.
1 Siedle Classic audio set circuit
diagram
2 Siedle Classic video set circuit
diagram
Range
SNG850-… to door station
max.100m,
SNG850-… to the most remote
indoor device max. 100m, with
0.8mm core diameter.
Terminal assignment
Door station
Tak, Tbk In-Home bus camera
branch
Ta, Tb In-Home bus
b, c Power supply 12VAC