St. Jude Medical Merlin@home EX1150 Quick Start Guide

Merlin@home™ Transmitter
Model EX1150
Quick Start Guide
Set up the transmitter
2
If you have an empty wall jack, remove the
transmitter cord from the phone connector
and plug the transmitter cord into the wall
jack. Go to Step 5.
If you do not have an empty wall jack,
remove your phone cord from the wall jack.
3
Plug the phone connector into the wall jack.
Note. The transmitter is designed for use with direct analog telephone lines. It
may be damaged by any other type of phone line. The transmitter might work with
VOIP and cable services. For Technical Support in North America, call 1-877-MY-
MERLIN (1-877-696-3754) Monday through Friday 8AM to 8PM Eastern Stand-
ard Time
1
Place the transmitter on your nightstand or a table close
to your bed. The transmitter should be no more than
10 feet from your bed.

St. Jude Medical Merlin@home EX1150 Specifications

General

Device Type	Transmitter
Model	EX1150
Manufacturer	St. Jude Medical
Storage Temperature	-20°C to 60°C
Humidity Range	10% to 95% non-condensing
Compatible Devices	St. Jude Medical implantable cardiac devices
Communication Method	RF
Data Transmission	Automatic scheduled transmissions
Connectivity	Wireless
Power Source	AC Power
Battery Backup	Yes
Weight	0.5 kg
Operating Temperature	0°C to 40°C