ST STM32F1 Series - Figure 7. Schematic of Connector J2; Figure 8. STM32-Discovery Board; Figure 9. Slave Device Setup (STEVAL-ILM001 V1 and STM32-Discovery Board)

DocID025866 Rev 1 23/31
UM1728 Application setup
31
Figure 7. Schematic of connector J2
5. Connect the STM32-discovery board to any USB (no SW or driver installation required,
it is used only as the supply for basic evaluation).
Figure 8. STM32-discovery board
Figure 9. Slave device setup (STEVAL-ILM001V1 and STM32-discovery board)