Running the PC software for DALI-STM32 UM1728
28/31 DocID025866 Rev 1
Figure 16. Ballasts window after clicking on update
Figure 17. Light level window during fading
Physical selection of ballast can also be done with the help of the button provided on the
STEVAL-ILM001V1 board. Select “Extras” menu, item “Search for ballasts …”.and then
“Physical selection” in search for ballast window. And then press the button on the board
and the ballast is detected by the master device. But during physical selection only one
ballast is selected at a time.
To Next Page
Loading...