• Do not permit the area around the diffuser to become damp or wet. If damp-
ness occurs, turn the output of the diffuser down. If the diffuser output can-
not be turned down, use the diffuser intermittently. Do not allow absorbent
materials, such as carpeting, curtains, drapes, or tablecloths, to become
damp.
• Be aware that high humidity levels may encourage the growth of biological
organisms in the environment.
• Unplug the appliance during filling and cleaning.
• Never leave water in the water tank when the appliance is not in use.
• Clean the water tank every 3 days
• Empty and clean the appliance before storage. Clean the appliance before
next use.
• Warning: Micro-organisms that may be present in the water or in the envi-
ronment where the appliance is used or stored, can grow in the water tank
and be blown in the air causing very serious health risks.
Setting up / operation
1. Place Lucy in the desired position on a flat surface. Connect the USB-C cable
(1) to the appliance (2) and connect the cable to a suitable power source (PC,
external battery, USB socket or to a suitable socket via a power adapter with
2 A/5 V). When the appliance is used for the first time, the battery must be
charged by connecting the appliance to a power source for at least 6 hours.
When the battery is fully charged, the status LED light (3) will go out. After
the battery has been fully charged for the first time, you can operate the ap-
pliance without the cable using the power from the integrated rechargeable
To Next Page
Loading...
