EasyManua.ls Logo

Stadler Form Nora - Operation Guide; Setup and Usage

Stadler Form Nora
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Prior to any maintenance, cleaning and after each use, switch off the appli-
ance and unplug the mains cable from the socket.
Repairs to electrical appliances must only be carried out by a qualified elec-
trical technician.
WARNING: Only use the USB cable provided by the manufacturer. Use only
an external supply with the following specifications: DC 5V/2A.
Do not permit the area around the diffuser to become damp or wet. If damp-
ness occurs, turn the output of the diffuser down. If the diffuser output can-
not be turned down, use the diffuser intermittently. Do not allow absorbent
materials, such as carpeting, curtains, drapes, or tablecloths, to become
damp.
Be aware that high humidity levels may encourage the growth of biological
organisms in the environment.
Unplug the appliance during filling and cleaning.
Never leave water in the water tank when the appliance is not in use.
Clean the water tank every 3 days
Empty and clean the appliance before storage. Clean the appliance before
next use.
Warning: Micro-organisms that may be present in the water or in the environ-
ment where the appliance is used or stored, can grow in the water tank and
be blown in the air causing very serious health risks.
Setting up / operation
1. Place Nora in the desired position on a flat surface.
Remove the cover from
the connector for the USB-C cable (2). Keep the cover in a safe place as it is es
-

Related product manuals