To Next PageTo Next Page
Need help?Do you have a question about the Stagg SUW 12H-BE and is the answer not in the manual?
Highlights wireless 2.4 GHz headset, automatic pairing, rechargeable battery, and versatility for various events.
Details frequency range, response, impedance, microphone type, sensitivity, power, and operational distance.
Lists included items: transmitter, receiver, headset, adapter plug, charger cord, and user manual.
Step-by-step guide for connecting, turning on, matching, and adjusting the wireless microphone system.
This document describes the Stagg SUW 12H-BE Beige Wireless Headset Microphone Set, a versatile audio solution designed for various applications such as presentations, educational events, and singing performances. It can also be used as a computer microphone or for video sound recording.
The set includes a wireless 2.4 GHz headset condenser microphone transmitter and a receiver. Both components are designed to couple automatically, making them easy to operate. The system supports up to four identical sets working together simultaneously without interference.
A key feature of this device is its power source: both the transmitter and receiver operate on rechargeable lithium batteries. This design allows for a versatile solution, especially when paired with battery-powered speakers, making it highly portable and suitable for outdoor or remote use. The system offers an operational time of up to 6 hours on a full charge, providing ample usage for most events.
For maintenance and user convenience, the device includes a double charger cord, allowing both the transmitter and receiver to be charged simultaneously. The power light on the device serves as an important indicator for battery status. It turns red to signal low battery power and switches off when the battery level drops below 10%. Users are advised to charge the device promptly to avoid any interruptions during use.
Setting up the system is straightforward. First, connect the receiver to the MIC input of an amplifier, speaker, or other audio equipment. If necessary, use the included 6.35 mm audio adapter plug. Next, turn on the receiver using its power switch; the power light will blink. Then, turn on the transmitter using its power switch, and its power light will also blink. The transmitter and receiver will automatically match, and once paired, their power lights will remain steadily on. After pairing, users can adjust the volume to the desired level using the volume buttons on the device. Finally, position the microphone, and the system is ready for use.
The wireless microphone should be stored in a dry and well-ventilated area to prevent damage from humidity. Users are strongly advised not to open the device themselves for any service or repair. Instead, for any maintenance or repair needs, it is recommended to contact a local distributor or a qualified specialist. The manufacturer reserves the right to update specifications and instructions without prior notice, ensuring continuous improvement of the product.
The package content includes the transmitter, receiver, a beige headset with a boom microphone, a 6.35 mm audio adapter plug, a double charger cord, and a user manual. This comprehensive set ensures that users have all necessary components for immediate use and proper maintenance. The device is designed for ease of use, reliability, and flexibility, catering to a wide range of audio recording and amplification needs.
General| Polar Pattern | Cardioid |
|---|---|
| Frequency Response | 50Hz-15kHz |
| Connector | XLR |
| Color | Black |
| Impedance | 600 Ohm |
| Operating Frequency | 863 - 865 MHz |
| Power Supply | Battery |
