Need help?Do you have a question about the Stahl 6125 Series and is the answer not in the manual?
General| Rated Voltage | 220 - 240 V AC |
|---|---|
| Enclosure Material | Aluminium, Powder-coated |
| Ingress Protection | IP66 / IP67 |
| IP Rating | IP66 / IP67 |
| Voltage | 220 - 240 V AC |
| Material | Aluminium, Powder-coated (Enclosure) |
Details R. STAHL contact information for manufacturing.
Provides ID-No. and Publication Code for the manual.
Lists related documents like data sheets and where to find them.
Mentions certificates, EU Declaration of Conformity, and IECEx approval.
Explains symbols used within the operating instructions.
Details the structure and meaning of warning notes (DANGER, WARNING, CAUTION, NOTICE).
Lists symbols found on the device itself and their meanings.
Provides guidelines for storing operating instructions.
Covers safety precautions before, during, and after installation and operation.
Describes the intended application areas and zones for the floodlight.
Warns against modifications and their consequences.
Details the application range and certification for hazardous areas.
Illustrates and lists the components of the floodlight device.
Specifies explosion protection ratings for IECEx and ATEX.
Lists the certifications the device holds.
Details rated voltage, current, and inrush current characteristics.
Presents data on luminous flux, efficacy, and lumen decrease.
Specifies operating and storage temperature ranges.
Provides service life data based on ambient temperature.
Details degree of protection, impact strength, material, and enclosure.
Covers cable entry and connection terminal specifications.
Lists alternative materials for the enclosure.
Provides guidelines for transporting and storing the device.
Warns about explosion hazards due to incorrect installation.
Shows dimensional drawings and fastening details.
Details safe mounting, dismounting, and operating position guidelines.
Covers the general installation process.
Explains the procedure for opening and closing the device enclosure.
Provides instructions for making electrical connections.
Details tightening torques and precautions for cable entries and stopping plugs.
Warns about explosion hazards due to incorrect installation before commissioning.
Alerts about malfunction/damage from condensation.
Warns about explosion hazards from hot components when opening.
Warns about electric shock/malfunction from unauthorized work.
Warns about damage from electrostatic discharge.
Provides guidelines for performing maintenance and inspections.
Warns about moisture damage to electronic components.
Warns about explosion hazards from improper repair procedures.
Outlines the process for returning the device for service or repair.
Advises on cleaning procedures and avoiding electrostatic charging.
Instructs to observe regulations for disposal and recycling.
Warns about using non-original components and advises using genuine parts.
To Next Page