3
ASSEMBLY INSTRUCTIONS
3. REMOVE PLASTIC BAG FROM
STEPMILL.
PLASTIC BAG
4. USE KNIFE TO REMOVE PLASTIC
TYRAPS SECURING FRAME TO PALLET.
USE CLAW HAMMER TO REMOVE
WOODEN PACKING BLOCKS
WOOD BLOCK
TYRAPS
5. REMOVE STEPMILL FROM PALLET:
SLIDE THE MACHINE FORWARD SO THAT
THE FRONT EDGE OF THE MACHINE
HANGS OFF THE FRONT OF THE PALLET.
CAREFULLY TIP THE STEPMILL FORWARD
UNTIL THE FRONT EDGE OF THE MACHINE
TOUCHES THE FLOOR. CONTINUE TO
PULL THE MACHINE FORWARD UNTIL IT
IS CLEAR OF THE PALLET. GENTLY TIP
THE STEPMILL BACK SO THAT THE
MACHINE RESTS ON THE BASE OF THE
FRAME. DISCARD PALLET.
To Next Page
Loading...