Need help?Do you have a question about the Stakpure OmniaPure xstouch Blueline and is the answer not in the manual?
Describes shock hazards associated with improper electrical supply and precautions.
Details risks of falling due to improper handling or attachment and required secure positioning.
Explains risks from liquid leaks and ensures safe operation with proper containers.
Covers injury risks from disinfectants, UV radiation, and crushing/pinching during handling.
Describes uses in analytical and biochemical applications, specifying treated water is not for consumption.
Details correct lifting points to avoid device damage during transport.
Specifies feedwater source, pressure, temperature, and TOC limits.
Lists ASTM I quality parameters like conductivity, TOC, particle count, and bacteria.
Lists connection types for water and data, and electrical parameters like voltage and power.
Specifies operating area, altitude, ambient temperature, and voltage fluctuation limits.
Provides physical measurements (height, width, depth) and weight of the system.
Lists materials used for components in contact with water.
Illustrates system components and water flow for the UV-TOC model.
Illustrates system components and water flow for the UV-TOC/UF model.
Identifies key system parts such as the dispenser, cartridges, UV reactor, and UF module.
Explains the stages of water purification using pre-treatment, UV, and filtration technologies.
Specifies requirements for the installation location, including space, power, and drain.
Provides instructions for placing and securing the unit at the operating site.
Details hose connections for feed water and drain, and power supply setup.
Instructions for inserting the pretreatment and ultrapure water cartridges.
Describes the process of attaching the sterile filter to the dispenser outlet.
Details how to attach the system to a wall using the optional wall holder.
Explains drilling holes and mounting the rail to the wall securely.
Describes lifting and securing the system onto the mounted wall rail.
Describes the elements and indicators shown on the device's main screen.
Illustrates the pathways and structure for navigating between system menus.
Explains how to change values and confirm inputs using buttons and menus.
Details how to select and dispense specific volumes of ultrapure water.
Lists functions available in the client menu, like consumption monitoring and error logs.
Outlines settings for limits, pumps, circulation, and date/time configuration.
Details calibration procedures for sensors, UV, and other system parameters.
Describes the initial power-up sequence and discarding the first liters of water.
Lists recommended service intervals for cartridges, UV lamp, and disinfection.
Provides step-by-step instructions for replacing pretreatment and ultrapure water cartridges.
Explains how to disinfect the system using the approved disinfection kit.
Describes the steps to safely disconnect the system from power and water.
Lists common system faults, their possible causes, and recommended remedies.
Details specific error messages displayed on the device and their potential causes.
Covers errors related to measuring cells, sensors, UV lamp, and leakage.
General| Brand | Stakpure |
|---|---|
| Model | OmniaPure xstouch Blueline |
| Category | Water Dispenser |
| Language | English |
To Next Page