Page 12
CHARGING PROCESS
FOR THE STAND AID MODEL 1501, PLUG THE POWER CORD INTO A
WALL ELECTRICAL OUTLET, THE CHARGER IS LOCATED NEXT TO
THE BATTERY IN BATTERY PAN.
Please be advised that you can over-charge the battery. Stand Aid has
changed the Battery Charger system. The current charger will give a slow
trickle if the charger is left on the battery for a long period of time. Please
use proper care, and try not to charge the battery more than 12 consecu-
tive hours at one given time. This will help insure the battery’s long life,
and trouble free service.
IMPORTANT:
NEVER CHARGE THE UNIT FOR MORE THAN 10-12 HOURS AT A TIME.
NEVER OPERATE THE UNIT WHILE THE UNIT IS CHARGING.
PREVENTIVE MAINTENANCE AND REPAIR
Keep all electrical connections clean and dry.
If the lift operates slowly, charge the battery for 18-24 hours. If the unit
still operates slowly, you may need to change the battery. Replacement
battery may be ordered by calling Stand Aid of Iowa at 1-800-831-8580.
CAUTION!! DO NOT OPERATE YOUR STAND AID
LIFT ARMS WHILE CHARGING THE BATTERY!!
If one or both of the lift arms fail to operate, check all electrical connec-
tions by disconnecting, cleaning and reconnecting. If this does not remedy
the situation, call 1-800-831-8580 and ask for the service department.
For any other repairs, maintenance or trouble shooting, please feel free to
call during regular business hours from 7:00 A.M. to 5:00 P.M. CST.
To Next Page
Loading...