Need help?Do you have a question about the Stanley FatMax FMC792 and is the answer not in the manual?
General| Brand | Stanley FatMax |
|---|---|
| Model | FMC792 |
| Category | Nail Gun |
| Language | English |
Keep work area clean and well lit, avoid explosive atmospheres, and keep children/bystanders away.
Proper plug use, avoid body contact with earthed surfaces, do not expose to rain/wet, do not abuse cord.
Stay alert, use PPE, prevent unintentional starting, remove keys, do not overreach, dress properly.
Check for misalignment, breakage, and other conditions. Repair if damaged.
Use tool and accessories according to instructions and conditions.
Recharge with specified charger, use designated battery packs, keep terminals clear, avoid contact.
Do not point tool towards self/nearby, do not actuate unless against workpiece, disconnect power for jams.
Risks include injuries from moving parts, prolonged use, hearing impairment, and health hazards from dust.
Declares vibration values and notes that actual vibration may differ from declared values.
Covers battery handling, fluid hazards, charger warnings, and proper charging procedures.
Covers charger for indoor use only, read manual symbol, and electrical safety for double insulated adapters.
Lists key features of the appliance, such as Trigger Switch, Depth Adjustment, and Magazine.
Instructions for charging the battery, including temperature limits, charging notes, and diagnostics.
Details optimal charging temperature, battery/charger warmth, troubleshooting, and recharge schedules.
Provides step-by-step instructions for inserting and removing the battery pack from the appliance.
Covers safety precautions before use, keeping fingers away from trigger, and pre-operation checks.
Instructions on not spraying lubricants inside and removing the battery for adjustments.
Details pre-loading checks, how to load fasteners into the magazine, and how to unload them.
Explains how to adjust fastener depth using the wheel and safety precautions before adjusting.
Describes work lights, low battery indicator, jammed nail indicator, and the stall release mechanism.
Provides safety precautions before clearing jams and initial steps to clear a jammed nail.
Details further steps for clearing jams, tool disable/reset, and advice for frequent jamming.
Covers cold/hot weather operation, belt hook installation, and replacement parts.
Lists common problems like unit not starting, tool not actuating, and their possible causes and solutions.
Covers issues where the tool does not drive fasteners fully and notes that the product is not user serviceable.
Provides maintenance advice, cleaning warnings, and information on protecting the environment.
Lists specifications for the tool, fasteners, charger, batteries, sound levels, and vibration.
To Next Page