iQ Control Box
10.18.2019
1.800.7.ACCESS • www.stanleyaccess.com • Document # 204143 REV 5 21
Copyright 2019, Stanley Access Technologies, LLC. All rights reserved. Reproduction
in whole or in part without the express written permission of Stanley is prohibited.
Attachment 2
Magic-Force Wiring Diagram—iQ
(Sheet 1 of 1)
NOTES:
1. MULTIPLE SU100 SENSOR WIRES ARE WIRED IN PARALLEL.
2. WHEN POWER CLOSE IS REQUIRED, THE MONITORING INPUTS (BREAKOUT INPUT TB3 - 9 AND HOLDING BEAM INPUT TB5 - 7), MUST BE CONFIGURED WITH I/O CONFIGURATION PARAMETER.
3. IF USING TB3 - 9 FOR POWER CLOSE MONITORING, BREAKOUT STATUS SWITCH MUST BE DISCONNECTED.
ENCODER 2
ENCODER 1
TB3 TB5 TB7
TB1 TB6
Class 2 Supply 12 Volts
JP301
&
To Next Page
Loading...
