19
ENGLISH
Item numbers in bold refer to g. 19 and table 9.
• The air supply must be disconnected.
• Install Ejector Assembly (TRM00494) and Return Spring (TP144-082).
• Screw End Cap (TP153-112) together with O-Ring (TP154-110), Ejector Guide (TP144-063).
• Fit Collector Adaptor (TP153-111) together with MCS Valve Pusher (TP144-142).
• Place Collector Adaptor Cover (TRM00033) over Collector Adaptor (TP153-111) and then install De ector
Adaptor (TRM00492) until the end face of Collector Adapter Cover (TRM00033) is secure against the
mating face of Collector Adapter (TP153-111).
• Screw SMC KQ Fitting (PRT5250-98 or PRT5250-99) together with Adapotor Bushing (4 or 6 size) to MCS
Adaptor Cap (MCS5000-78).
• Fit MCS Adaptor Cap (MCS5000-78) to De ector Adaptor Assembly (TRM00492).
• Attach Strain Relief (MCS5000-81) to Adapotor Bushing (4 or 6 size).
• Connect the Tool and MCS5000 kit to the MCS5000 unit as instructed within the MCS5000 datasheet.
To Next Page
Loading...
