Stanley FATMAX SFMCMW2653 - Product Information and Assembly; Battery Type and Package Contents; Tool Markings and Description; General Assembly Precautions

10
ENGLISH
Charge STANLEYFATMAX battery packs only
with designated STANLEYFATMAX chargers.
Charging battery packs other than the
designated STANLEYFATMAX batteries with a
STANLEYFATMAX charger may make them burst or
lead to other dangeroussituations.
Do not incinerate the batterypack.
Battery Type
The SFMCMW2653 operates on 54V batterypacks.
For optimum results, use: SFMCB6025, SFMCB605, SFMCB6075
Refer to Technical Data for moreinformation.
Package Contents
The package contains:
1 Lawn mower
1 Grass Collection Bag
1 Safety Key
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any
use of such marks by STANLEYFATMAX is under license.
Other trademarks and trade names are those of their
respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Beware of sharp blades. Blades continue to rotate after
the motor is switched off. Remove disabling device
beforemaintenance.
Beware of flying objects. Keep bystanders away from
the cuttingarea.
98
Directive 2000/14/EC guaranteed soundpower.
Do not expose torain.
The blades will continue to rotate after the
machine is switchedoff.
Date Code Position(Fig.A)
The date code
38
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019 XX XX
Year of Manufacture
Description(Fig.A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
ON-OFF switch box
2
ON-OFF button
3
Safety key
4
Handle
5
Bail handle
6
Handle locks
7
Handle brackets
8
Handle storage detent
holes
9
Battery port cover
10
Cut height adjust lever
11
Rear door cover
12
Grass collection bag
13
Grass collection bag
handle
14
Upper carrying handle
Intended Use
This lawn mower has been designed for professional lawn
mowingapplications.
DO NOT use under wet conditions or in presence of flammable
liquids orgases.
This lawn mower is a professional lawn careappliance.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
ASSEMBLY

DANGER: To reduce the risk of serious personal
injury, turn unit off, remove safety key, and
remove battery pack before assembly, making any
adjustments or removing/installing attachments or
accessories. An accidental start-up can causeinjury.
Adjusting Handle Height(Fig.B)
The mower is shipped in storage mode. You will need to adjust
the handle to operating position beforecontinuing.
1. To unlock the handle
4
from storage position, twist the two
handle locks
6
90°. The handle locks are located on both
sides of the handle as shown in Fig.B .
2. R aise the handle to operatingposition.
3. Locate the three handle detent holes
34
located on the
handle brackets
7
as shown in Fig.B.
4. Adjust the handle to the position that best fits the operator
and lock the handle in place by twisting the handle locks
back 90° and allowing the handle locks
6
to snap into the
desired detentholes.