This document describes the STANLEY FATMAX SFMCBL730 blower, a cordless, brushless, lithium-ion powered tool designed for various blowing and cleaning applications. It is suitable for both professional and private, non-professional use.
Function Description:
The STANLEY FATMAX SFMCBL730 is a blower tool that utilizes a brushless motor and a V20 Lithium-Ion battery system to generate airflow for clearing debris. It features a variable speed trigger and a boost button to optimize performance and power as needed. The tool is designed for upright operation and should not be used on its side or upside down.
Important Technical Specifications:
- Model: SFMCBL730
- Voltage: 18 Vdc
- Air Speed: 177 km/h (110 MPH)
- Air Volume: 11.6 m³/min (410 CFM)
- Weight (without battery pack): 2.3 kg
- Battery Type: Li-Ion
- Compatible Battery Packs: SFMCB201 (1.5 Ah), SFMCB202 (2.0 Ah), SFMCB204 (4.0 Ah), SFMCB206 (6.0 Ah)
- Compatible Chargers: SFMCB11 (1.25 A), SFMCB12 (2 A), SFMCB14 (4 A)
- Charging Temperature Range: 10 °C to 40 °C (recommended approx. 24 °C)
- Sound Pressure Level (LpA) at work station: 90 dB(A), uncertainty (K) 3 dB(A)
- Sound Power Level (LWA): 96 dB(A), uncertainty (K) 1.3 dB(A)
- Vibration Emission Value (ah): < 2.5 m/s², uncertainty (K) 1.5 m/s²
- Directive Compliance: 2000/14/EC guaranteed sound power.
Usage Features:
- Battery System: The blower operates on the STANLEY FATMAX V20 Lithium-Ion battery system. Batteries are inserted into the tool handle and secured with a lock. To remove, press the release button and pull the battery out.
- Battery State of Charge Indicator: Batteries include an indicator with a button (6a) to quickly view the remaining charge.
- Blow Tube Assembly: The blower requires assembly of an upper tube (4) and a lower tube (5). These tubes must be securely attached before operation, with an audible click indicating proper engagement. For safety, the tubes are not intended to be separated once assembled.
- Switching On/Off: The tool is turned on by depressing the variable speed trigger (1) and turned off by releasing it.
- Variable Speed Trigger (1): Allows for control over the blowing speed.
- Boost Button (2): Located on the tool handle, this button provides an immediate increase in power for clearing heavy debris. Operating in normal mode (without boost) extends runtime.
- Proper Hand Position: Always use both hands to grip the product firmly when switching on, with one hand on the main handle (3).
- Weather Guard: The product (excluding battery and charger) offers some protection against light splashing. However, it should never be submerged in liquid or used in the rain. The battery and charger do not have Weather Guard protection.
- Safety Precautions: Always wear safety glasses, hearing protection, and a filter mask if dusty. Rubber gloves, long pants, and substantial footwear are recommended. Keep long hair and loose clothing away from moving parts. Do not point the discharge at yourself or bystanders.
Maintenance Features:
- General Maintenance: The tool is designed for long-term operation with minimal maintenance. Regular cleaning is essential for satisfactory operation.
- Cleaning:
- Regularly clean the ventilation slots in the tool and charger using a soft brush or dry cloth.
- Clean the motor housing with a damp cloth.
- Do not use abrasive or solvent-based cleaners on any part of the tool.
- Blow dirt and dust out of the main housing and air vents with dry air, wearing approved eye protection and a dust mask.
- Never immerse any part of the tool in liquid.
- Lubrication: The power tool does not require additional lubrication.
- Battery Care:
- Charge batteries within 1 week of discharge to prevent diminished battery life.
- Do not store batteries in temperatures exceeding 40 °C.
- Charge only at ambient temperatures between 10 °C and 40 °C.
- Use only the charger provided with the tool.
- Chargers feature a Hot/Cold Pack Delay to protect batteries if they are too hot or cold, suspending charging until an appropriate temperature is reached.
- Service: Have your power tool serviced by a qualified repair person using identical replacement parts to maintain safety. Damaged battery packs should only be serviced by the manufacturer or authorized service providers.
- Accessory Replacement: Only use STANLEY FATMAX recommended spare parts and accessories. Using unapproved accessories can be hazardous and may cause injury or product damage. Replacement fans are available from a STANLEY FATMAX service agent.
- Tightness Check: Keep all nuts, bolts, and screws tight to ensure the appliance is in a safe working condition.
Safety Warnings and Pictograms:
The manual emphasizes reading all safety warnings and instructions to prevent electric shock, fire, and serious injury. Key pictograms on the tool include:
- Read instruction manual before use.
- Wear ear protection.
- Wear eye protection.
- Do not expose to rain or high humidity.
- Switch off and remove battery before maintenance.
- Keep bystanders away.
- Guaranteed sound power level (LWA 98 dB).
- Charger is for indoor use only.
- Do not attempt to charge damaged batteries.
The STANLEY FATMAX SFMCBL730 blower is a robust and efficient tool, provided that all safety guidelines and maintenance instructions are followed diligently.
Need help?
To Next Page
General
