Stanley SLM-139-460-SP User Manual (English)

Questions and Answers:

C
Christina ThompsonAug 4, 2025
Why won't my Stanley Lawn Mower engine start?
- N
  Nicole JonesAug 5, 2025
  If your Stanley Lawn Mower's engine won't start, it could be due to several reasons. First, ensure that there is enough petrol in the tank; if not, fill it up. Another reason may be an incorrectly attached spark plug connector or a sooted spark plug. Attach the spark plug connector correctly. Clean, adjust, or replace the spark plug. If the starting sequence was not followed correctly, refer to the operation instructions. If none of these solutions work, the carburettor mix may be incorrectly adjusted, and it should be adjusted by a specialist workshop.
S
Stephanie CookAug 8, 2025
What to do if my Stanley Lawn Mower engine overheats?
- M
  Martha KelleyAug 8, 2025
  If your Stanley Lawn Mower engine overheats, it could be due to a blocked ventilation slot, so cleaning the ventilation slot might help. Also, check the spark plug and change it if it's incorrect. Finally, ensure there is enough engine oil; if not, fill it up.
C
Christina RojasAug 13, 2025
Why is my Stanley Lawn Mower output unsatisfactory or engine labouring?
- B
  brent47Aug 13, 2025
  If the output of your Stanley Lawn Mower is unsatisfactory or the engine is labouring, consider the grass height. If the grass is too short or too long, change the cutting height. Also, the blade might be blunt, so have it sharpened or replaced by a specialist workshop. Finally, check for any blockages; if the blade is blocked with grass, the grass collection box is full, or the ejection channel is blocked, remove the grass.
J
Jacqueline HillAug 17, 2025
Why does my Stanley Lawn Mower engine start but not run at full power?
- J
  Jill ReynoldsAug 17, 2025
  If your Stanley Lawn Mower engine starts but doesn't run at full power, the air filter may be dirty; replace the air filter. Alternatively, the carburettor mix may be incorrectly adjusted, requiring adjustment by a specialist workshop.
B
Brian DanielsAug 22, 2025
What to do if my Stanley Lawn Mower engine splutters and stops?
- E
  efarrellAug 22, 2025
  If your Stanley Lawn Mower engine splutters and stops, it could be due to an incorrectly adjusted carburettor mix, which should be adjusted by a specialist workshop. It might also be due to a sooted spark plug; in this case, clean, adjust, or replace the spark plugs.
T
Teresa SullivanAug 26, 2025
What to do if the blade on my Stanley Lawn Mower does not turn?