Stanley STHT0-77364 - Temperature Measurement and Warranty; Measuring Temperature; Temperature Probe Limitations; 1-Year Warranty

8
User Manual
GB
4. The display will show the approximate
forward voltage drop of the diode. If the
connection is reversed “1” will be displayed.
MeasuringTemperature
1. Set the range switch to the °C position.
2. Connect the negative ( – ) plug of the K type
thermocouple to the COM terminal and the
positive ( + ) plug of this K type thermocouple
to the
terminal.
3. Carefully place the sensing end of the
thermocouple on the object to be measured.
4. Wait until the reading stabilizes, and then
read the reading on the display.
NOTICE: To avoid possible damage to the
meter or other equipment, remember that while
the meter is rated for 0°C to +1000°C, the
K Type Thermocouple provided with the meter
is rated up to 250°C. For temperatures out of
that range, you must obtain and use a higher
rated thermocouple.
1-YEAR WARRANTY
Stanley warrants its electronic measuring
tools against deciencies in materials and
/ or workmanship for one year from date of
purchase.
Decient products will be repaired or replaced,
at Stanley’s option, if sent together with proof
of purchase to:
StanleyBlack&Decker
210BathRoad
Slough,BerkshireSL13YD
UK
Subject to change without notice