FX CONTROLS
LOOP CONTROLS
PLATTER CONTROLS
MIC CONTROLS
POWER USB PORT 2
USB PORTS 3 & 4
(INSIDE BOTTOM PANEL)
MASTER OUTPUT KENSINGTON™ LOCK
MASTER CONTROL HEADPHONE CONTROLS
TRANSPORT CONTROLS
PITCH CONTROLS
NAVIGATION AND MENU CONTROLS
DECK A
MIXER CONTROLS
DECK B
MIXER CONTROLS
MASTER METER
& RECORD
CROSS FADER
USB PORT 1
SCS.4DJ :: QUICK START GUIDE
A. BEFORE YOU START
Firmware updates will ensure your SCS.4DJ includes the lastest
features and improved functionality.
You must analyze your music files to utilize the following:
• Multicolored Waveforms
• BPM detection
• BPM driven effects
• SYNC
• Looping
• Auto DJ
Our offline analysis tool, QuickGrid is avaliable to download for
users with large libraries or those who wish to analyze their files
faster.
The SCS.4DJ defaults to a demo video. To disable the demo mode
press SYSTEM before the countdown clock ends.
For updates, videos, and more visit: www.stantondj.com/scs4dj
C. MY FIRST MIX
1. Press BROWSE and load a track to each deck. You can select
your tracks with the jog wheel, and use the Load A/Load B buttons
to load your tracks.
2. Press PLAY on deck A then press PLAY on deck B.
3. Press SYNC on either deck and use the crossfader to mix
between decks.
B. GET CONNECTED
1. Connect power supply to SCS.4DJ and secure cable with fastener.
2. Connect speaker cable to MASTER OUTPUT (RCA or ¼” ).
3. Power on SCS.4DJ and connect USB device (thumb/hard drive).
To Next Page
Need help?
General
