EasyManua.ls Logo

Star-Light HA-260SS - User Manual

Star-Light HA-260SS
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Question and Answer IconNeed help?

Do you have a question about the Star-Light HA-260SS and is the answer not in the manual?

Overview

This document describes the Star-Light HA-260SS / HA-260WH Cooker Hood, a household appliance designed for kitchen ventilation. It is available in two versions: an external extraction hood and a carbon filter recirculation hood.

Function Description:

The cooker hood is designed to extract cooking fumes and odors from the kitchen environment. In the external extraction version, air is discharged outside the room through a flue. In the carbon filter recirculation version, air is filtered and recirculated back into the room. The hood features a control panel with buttons for different fan speeds (Low, Middle, High) and a light function.

Important Technical Specifications:

  • Model: Star-Light HA-260SS / HA-260WH
  • Annual Energy Consumption (AEC): 101 kWh/a
  • Time Increase Factor (f): 1.8
  • Fluid Dynamic Efficiency (FDEhood): 5.9
  • Energy Efficiency Index (EElhood): 101.3
  • Measured Airflow Rate at Best Efficiency (QBEP): 191.1 m³/h
  • Measured Air Pressure at Best Efficiency Point (PBEP): 168 Pa
  • Maximum Airflow (Qmax): 347.4 m³/h
  • Measured Electric Power Input at Best Efficiency Point (WBEP): 151 W
  • Nominal Power of the Lighting System (WL): 2.5 W
  • Average Illumination of the Lighting System on the Cooking Surface (Emiddle): 78 lux
  • Measured Power Consumption on Standby Mode (Ps): - W
  • Measured Power Consumption on Off Mode (Po): 0 W
  • Sound Power Level (LWA): 70 dB
  • Rated Voltage: 230V~
  • Installation Distance: 65-75 cm above the cooking surface (at least 65 cm for gas appliances).

Usage Features:

The cooker hood offers flexible installation options:

  • Ducting Mode (External Extraction): For this mode, the lever should be set to the extraction position (Pic 2A). A one-way valve and ducting pipe are installed on the chosen outlet, the other outlet is covered with a plastic cap, and the charcoal filter (if present) is removed.
  • Filtering Mode (Internal Recirculation): For this mode, the lever should be set to the filtering position (Pic 2B). Outlet covers are installed, and a charcoal filter is inserted.
  • Horizontal/Vertical Suction: The hood is supplied with two air outlets, a plastic cap for the unused opening, and a retaining valve for the other outlet. Depending on the chosen solution, it can be set for rear discharge (Pic 3A) or top discharge (Pic 3B).

Installation:

  • Wall Installation: Requires drilling two Ø8 mm holes, inserting dowels, and securing with ST4*30 screws. The hood is then placed on the tightened screws and further secured with two additional screws (Pic 4A, 4B).
  • Cabinet Installation: Requires drilling four 6 mm holes in the bottom of the hanging cupboard. The one-way valve is placed on the hood, and the hood is installed to the bottom of the cupboard, tightened with enclosed 4*35mm screws (with washers and nuts) (Pic 5A, 5B).
  • Electrical Connection: The hood must be connected to a safety socket.

Operation:

The hood is operated via a switch panel (Pic 6):

  • Pressing the fan speed buttons (Low, Middle, High) turns on the motor at the corresponding speed.
  • Pressing "0" turns off the motor.
  • Pressing the light button turns the light on or off.

Maintenance Features:

Warning: Always disconnect the hood and allow it to cool completely before any maintenance.

  • Cleaning the Hood Exterior: Clean with a damp cloth and then dry with a dry cloth. Never immerse the hood in water or allow water to drip into it.
  • Cleaning the Aluminum Filter:
    1. Place the filter in 40-50°C water with detergent for 2-3 minutes. Use a soft brush to clean.
    2. Alternatively, the filter can be cleaned in a dishwasher at 60°C with detergent. All filters are metal; avoid corrosive detergents.
    3. Return the filter to its original position after it is fully dry.
  • Changing the Charcoal Filter (if supplied):
    1. Remove the aluminum filter.
    2. Remove old charcoal filters and replace with new ones.
    3. Return the filter to its original position.
    • Note: Replace charcoal filters every 3-4 months.
  • Changing Light Bulbs:
    1. Remove the aluminum filter.
    2. Change the olive-shaped bulb with a new one.
    3. Return the filter to its original position.

Safety Instructions:

  • Read all instructions carefully before use.
  • Ensure the rated voltage of 230V~ is used.
  • Do not operate if the cable or plug is damaged.
  • Installation should be performed by a qualified technician.
  • Disconnect from the power supply before maintenance or changing accessories.
  • Never allow children to operate the appliance.
  • The hood is for household use only; not suitable for garden or commercial use.
  • Clean the hood and its filter mesh regularly to maintain effective suction and prevent fire hazards.
  • The exhaust flue must not be mixed with used gas from other air cleaning appliances.
  • Faulty appliances or damaged cables must be repaired by an authorized service representative.
  • Accessible parts may become hot during use with cooking appliances.
  • Ensure adequate room ventilation when the hood is used simultaneously with gas or other fuel-burning appliances (not applicable for recirculation hoods).
  • Maintain a minimum distance of 65 cm between the cooking surface and the lowest part of the hood when placed above a gas appliance.
  • Children aged 8 years and above, and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, can use the appliance if supervised or instructed safely and understand the hazards. Children must not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.
  • If fixing or mounting screws penetrate into the hood's metallic enclosure (Class II construction), ensure they are installed according to instructions to avoid electric shock.

Environmental Protection:

  • To reduce environmental impact:
    1. Install the cooker hood in a proper place with efficient ventilation.
    2. Clean the cooker hood regularly to prevent air duct blockage.
    3. Remember to switch off the cooker hood light after cooking.
    4. Remember to switch off the cooker hood after cooking.
  • Waste electrical products should not be disposed of with household waste. Recycle where facilities exist. Consult local authorities or retailers for recycling advice. Do not disassemble the appliance in ways not described in this manual.

Star-Light HA-260SS Specifications

General IconGeneral
BrandStar-Light
ModelHA-260SS
CategoryVentilation Hood
LanguageEnglish