■ High speed, cost efficient 150mm / second quality
thermal barcode, receipt, ticket and A4 kiosk printing
solution for 58mm to 112mm formats up to 150gsm
/ 0.15mm thick.
■ Multi-position adjustable near end paper sensor with
80cm of cable for use with the high capacity paper
roll supply option
■ Adjustable horizontal or vertical mounted control
panel with extended cable lengths
■ A4 to A6 automatic scalable raster driver for
reduced, legible A4 or internet output on 112mm
wide paper
■ E
asy-load – simply lift and tilt the mechanism
forward and insert the paper for automatic paper
loading
■ Compact footprint of just 192mm x 179mm. Smaller
than many 80mm kiosk printers let alone an A4
replacement solution
■ TUP992 options include:
• 25cm paper roll holder (15cm standard). Max.
capacity 18cm when mounted
below printer
• Choice of interfaces
• PS60 power supply
■ The TUP900 Series of component parts are also
available for greater flexibility – TMP942 mechanism
with cabling and cutter, PR900 slim line presenter,
TBD900 Control Logic board, PNE sensor, PBD-9
power board etc.
TUP900 Printer Specifications
Mechanism – TMP942 & Cutter
Print Method Direct Thermal Line Printing
Print Speed up to 150mm per second
Top Margin 15mm (3mm selectable)
Print Resolution 8 x 8 dots / mm (203 dpi)
Motor T
orque
150gf or less
Paper Feed Speed 150mm / second
Paper Loading Semi Automatic
Paper Specifications:
Width
Min. 58mm to Max. 112mm
Media Thermal Paper Rolls
2 colour printing Special thermal paper required
Thickness 65g/m
2
~ 150g/m
2
/ 0.065 ~ 0.15mm
Roll Diameter
15cm / 6" standard with 25cm / 10" option (RHU-T900)
Paper Sensors Black Mark / Paper End / Paper Low Sensors
as standar
d
Autocutter Full or Partial Cut (guillotine)
Full Cut only with Presenter PR900 and TUP992
Autocutter Life up to 1 million cuts
Reliability 37 Million Lines MCBF
Contr
ol Boar
d TBD900
Flash ROM / SRAM 2 x 8 Mbit plus 2 x 1 Mbit Static RAM
Logo Store 2 Mbit
Emulations Star Line & Page Mode, ESC/POS™
Code Pages Star Mode = 40, ESC/POS™ Mode = 6 & 1 blank
Bar Code UPC-A, UPC-E, JAN/EAN-8 JAN/EAN-13, ITF,
CODE39, CODE93, CODE128, CODABAR (NW-7),
(PDF417 & Maxicode to follow)
Drivers W
indows 95 / 98 / ME / 2000™, XP™, NT4.0™,
OPOS™, Linux CUPS Support™, JavaPOS™,
Apple MAC™, Star Raster Driver
Presenter Unit – PR900
Driving Motor 1 DC motor
Paper Loop Upper Side Loop
Ejecting Speed 300mm/s
Paper thickness 65g/m
2
~ 150g/m
2
/ 0.065 ~ 0.15mm
Paper length 75mm to 300mm
Paper Width 80 to 112mm
Sensors 3 paper sensors including pr
esenter and document
captur
e counter
Life 1 million receipts
Interface Board (same as TSP600)
Interfaces available Parallel, Serial RS232C, USB, 9-Pin Serial RS232C
Power Supply – PS60
Supply Voltage 24V DC, (59 (W) x 32 (H) x 146 (L) mm)
Input Voltage 100V (-10%) to 240V (+10%)
TUP992 Open Frame System
Overall Dimensions 192 (W) x 179 (D) x 249.3 (H) mm / 2.84Kg
Printing Solution All specifications for each module apply
TUP900 Series
The complete kiosk printing solution available in
modular or open frame formats
30
To Next Page
Loading...
