Star Micronics LC24-20 - Page 106

Execute &SC> “A”
Mode ASCII Decimal
Hexadecimal
IBM
<ESC> “2” 27 50
IB 32
Sets the line spacing to the value defined by the last preceding
<ESC> “A” command. Setsthe linespacing to 1/6inch ifthere isno
preceding <ESC> “A” command.
Linefeed
Mode ASCII Decimal
Hexadecimal
Both <LF> 10 OA
Prints the current line and feeds the paper to the next line. See the
preceding commands for the line spacing.
Reverse linefeed
Mode ASCII
Decimal Hexadecimal
Std.
<ESC> <LF> 27
10 IB OA
IBM
1
<ESC> “ “ 27 93
IB 5D
Prints the current lineand feeds the paper in the reverse direction to
thepreceding line.Seethepreceding commands forthelinespacing.
Selectforward feed mode
Mode Ascll
Decimal Hexadecimal
Std.
<FS>
“F”
28 70 IC 46
Cancels the reverse feed mode and selects forward feed mode. This
is the default setting at power-on.
Select reversefeed mode
Mode I ASCII
\ Decimal
I Hexadecimal I
Std.
<FS>
“R”
28 82 ]
IC 52
Selects reverse feed mode. Reverses the direction of all vertical
movements. Ignored when friction feed or bottom feed is used.
98