Star Micronics LC24-20 - Page 119

Select graphics mode
Mode
ASCII
Decimal
Hexadecimal
Std.
<ESC> “*”
M
n] 27 42 no nl
1B 2A /?0 n]
n2 ml
m2
n2 ml m2
n2 ml rn2 .,,
Selects one of eleven graphics modes depending on the value of nO
and prints bit-image graphics in this mode. See <ESC> “K” (for 8-
bit graphics) or <FS> “Z” (for 24-bit graphics) for information on
III, n2, ml, m2, . .
no Graphics mode
O X-bitNormal-density
1 8-bit Double-density
2 8-bit Double-density. double-speed
3 R-bitQuadruple-density
4 8-bit CRT graphics, mode I
6 8-bit CRT graphics. mode 11
32 24-bit Normal-density
33 24-bit Double-density
~g 24.bit CRT graphics
39 24-bit Triple-density
40 24-bit Hex-density
Select graphics mode
(60 dots per inch)
(120dots per inch)
(120 dots per inch)
(240 dots per inch)
( 80 dots per inch)
(90 dots per incb)
( 60 dots per inch)
(120dots per inch)
(90 dots per inch)
(180dots per inch)
(360 dots per inch)
Mode ASCII
Decimal
Hexadecimal
IBM
<ESC> “[” “g”
n]
/12
28
91 103 n/ }72
1B 5B 67 n/ /72
rrl(l
m 1
n72
rn(l
ml m2 .
mo ml m2 ...
Selects one of eight graphics modes depending on the value of n~O
and prints dot graphics in thismode. The graphics image is
(nf + n2
x 256) – 1dots wide. See <ESC> “K” (for 8-bit graphics) or <FS>
“Z” (for 24-bit graphics) for information on
mI, n?2,...
no Graphics mode
O 8-bit Normal-density
I 8-bit Double-density
2 8-bit Double-density. double-speed
3 8-bit Quadruple-density
8 24-bit Normal-density
9 24-bit Double-density
I I 24-bit Triple-density
12 24-bit Hex-density
( 60 dots per inch)
(120dots per inch)
(120dots per inch)
(240 dots per inch)
( 60 dots per inch)
(120dots per inch)
(180
dots per inch)
(360 dots per inch)