Star Micronics LC24-20 - Other Printer Commands

OTHER PRINTER COMMANDS
Set h4SB to 1
Mode ASCII Decimal Hexadecimal
Std.
<ESC> “>”
27 62
IB 3E
Sets the most significant bit of each subsequent byte received to 1,
allowing userswith a 7-bitinterfaceto accesscharacters withASCII
codes greater than 127.
Set MSB to O
Mode ASCII
Decimal
Hexadecimal
Std.
<ESC> ‘s=”
27
61
IB 3D
Sets the most significant bit of each subsequent byte received to O.
Accept MSB as is
Mode ASCII
Decimal
Hexadecimal
Std.
<ESC> “#”
27 35
IB 23
Cancels the preceding commands and accepts the most significant
bit as it is sent to the printer.
Delete last character sent
Mode ASCII
Decimal Hexadecimal
Std.
<DEL> I127
7F
Deletes the last character received. Ignored if the last character
received has already been printed, or if the last character received
was all or part of a command.
Cancel last line
Mode ASCII
Decimal Hexadecimal
Both
<CAN> 24 18
Deletes the last line currently present in the print buffer.
117