Star Micronics SLIP SP298 SERIES - Page 34

31
<ESC> “M”
1B 4D
Selects 7 × 9 (half dot) font
<ESC> “P”
1B 50
Selects 5 × 9 (2 pulses = 1 dot) font
<ESC> “:”
1B 3A
Selects 5 × 9 (3 pulses = 1 dot) font
<ESC> <SP> n
1B 20 n
Sets character spacing
Sets the spacing between characters according to the value of n.
The value of n can be set from 0 through 15, or from “0” through “9”
and “A” through “F”.
The default value of n is 0.
<SO>
0E
Sets the printing magnified double in character width.
Prints the subsequent data including a character spacing set by
<ESC><SP> n, magnified double in character width.
<DC4>
14
Resets the printing magnified in character width.
Resets the printing magnified in character width set by <SO>, and
<ESC> “W”n.
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION