58
<ESC> “@”
1B 40
Initializes printer
Reinitializes the printer. Clears the print buffer and returns settings
to their power-up values.
Does not clear the input buffer, downloaded characters, or conditions
for peripheral devices.
If this command is specified in page mode while printing using the
slip printer, printing is not carried out and the printer returns to line
mode from page mode.
This command cannot recover from errors or return to the on-line
status from off-line.
<ENQ>
05
Enquiry
Causes the printer to transmit a status byte.
n1
<ESC>"q" command function
“0”
Executes release
“1”
Executes release
“2”
Executes release after the paper has been completely released in
the forward direction
“3”
Executes release after the paper has been completely released in
the reverse direction
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
To Next Page
Loading...
