Star Micronics SM-S230I Series - Page 25

[Setting Table]
POWER lamp
(Number of ashes)
Printer Mode
(Switch over by FEED button)
ERROR lamp
(Number of ashes)
Setting
(Set by POWER button)
1 Communication Port *1)
1 USB
2 Bluetooth(Mac)
3 Bluetooth(Auto)*
2 Print Density
1 LOW
2 MEDIUM *
3 HIGH
3 Print Speed
1 LOW (50 mm/s)
2 HIGH (80 mm/s) *
4 BM Sensor
1 NO USE *
2 USE
5 BM Sensor Sensitivity
1 LOW(204) *
2 MEDIUM1(409)
3 MEDIUM2(613)
4 HIGH(818)
6 Auto Power Down
1 NO USE*
2 1 min Sleep
*
2)
3 2 min Sleep
*
2)
4 3 min Sleep
*
2)
5 4 min Sleep
*
2)
6 5 min Sleep
*
2)
7 1 min Off
8 2 min Off
9 3 min Off
10 4 min Off
11 5 min Off
7 Auto Connection Function
1 ON *
2 OFF
* : default
Refer to the next page for *1 and *2.
Note :
To change the memory switch setting of the table below, use the buttons on the printer
or the StarPRNT Intelligence application that can be downloaded from our web site.
- 25 -