123
APPENDIX
Important!
Slip paper must be flat, smooth, and free of curls, bends, wrinkles and folds, all
of which can cause jamming and soiling by ink.
Print Position
Do not use paper with perforations within the shaded area. Perforations may cause the
paper sensor to erroneously report an out of paper condition.
Paper Feed
Drive Stepping motor
Pitch Star Mode: Adjustable in 1/144
″
units
ESC/POS Mode: Adjustable in
n
/60
″
units (approximate)
Speed (while printing) 3.5
″
per second
Speed (while ejecting) 4.5
″
per second
Paper feed
direction
No holes in this area
8 mm
SP298Ap.fm Page 123 Wednesday, October 1, 2008 10:24 AM
To Next Page
Loading...
