Star Micronics SP500 Series - 5-2. Auto Cutter Model; 5-2-1. Loading the Ribbon Cartridge

– 17 –
ENGLISH
H
V
OFF
ONON
E
R
R
O
R
ERROR
POWER
FEED
H
V
OFF
OFF
O
N
ON
ERROR
ERROR
POWER
POWER
FEED
FEED
OFF
ON
ON
5-2. Auto Cutter Model
5-2-1. Loading the Ribbon Cartridge
1 Turn off power to the printer.
2 Open the cover.
Important!
1. Do not touch the print head imme-
diately after printing as it can be
extremely hot.
2. Do not touch the cutter blade.
· There is a cutter inside the pa-
per outlet slot. Not only should
you not put your hand in the
paper outlet slot while printing
is in progress, never put your
hand into the outlet even when
printing is not in progress.
3 Lift up the auto cutter and put it in a
vertical position, as shown in Fig. 5-
9.
Fig. 5-8 Opening the cover
Fig. 5-9 Raise the auto cutter
Cover
Power off
Auto cutter