– 37 –
Switch Function ON OFF
3-1 Always OFF Should be set to off
3-2 Initialization of settings Valid Invalid
3-3 Always OFF Should be set to off
3-4
#9100 Multi-session
Valid Invalid
(Maximum 8 sessions)
The factory settings of DIP switch are all OFF.
The firmware must be ver.2.02 or later.
DIP-SW 3
■ LED Display
Green : Lights when other party connection is recognized as 10BASE-T.
Orange : Lights when packets are received.
Installing the Printer Driver and the LPR Port Driver Set
To use the Ethernet interface from Microsoft’s Windows 95/98 and ME, the “Star
LPR Port Driver Set” along with the printer driver is necessary.
Download the Printer Driver and the Star LPR Port Driver Set from the following
Web site.
Printer Driver URL : http://www.star-m.jp/eng/dl/dl02.htm
* To use Windows NT 4.0/2000/XP, the “Star LPR Port Driver Set” is unnecessary.
DIP-switch 3
LED
To Next Page
Loading...
