Software Manual
39
Paper Type
You can choose the length of each printed page.
Value Default Details
Receipt * Pages have variable length (printed to last line).
Ticket All printed pages have same length.
Page Cut Type (Cutter Model only)
You can choose the cut type that is performed at the end of all intermediate pages (all pages up to
the last page).
Value Default Details
No Cut * No intermediate pages are fed to the cutter.
Partial Cut All intermediate pages are fed to the cutter and are partially cut.
Document Cut Type
You can choose the Cut action for the final page.
< Cutter Model >
Value Default Details
No Cut The final page is not fed to the cutter.
Partial Cut * The final page is fed to the cutter and partially cut.
< Tear Bar Model >
Value Default Details
No Cut The final page is not fed to the tear bar.
Tear Bar * The final page is fed to the tear bar.
To Next Page
Loading...