Software Manual
73
(6) If the application is launched from the Start menu while there are multiple available printer
queues, the following window will appear. Select a target printer, and click “OK”.
If the LAN function is installed, you can select the "Add TSP100LAN" checkbox to start the
Ethernet setup tool.
(7) Select a target emulation, and click “OK”.
(8) The "TSP100 Configuration" window will be opened.
IMPORTANT: After changing any setting in the "TSP100 Configuration" window, be
sure to click “Apply Changes”.
The changed setting is enabled by clicking “Apply Changes”.
To Next Page
Loading...