Software Manual
11
1.3. Adding a Printer (TSP100IIIW)
This manual describes how to connect the printer using WPS.
If you are using Windows 7, you can also connect over an Ad-Hoc network. For details, see the
Online manual
(Setup - Connect Tablet/PC).
Notes:Printer addition requires computer's administrator privileges.
1.3.1. Printer LAN Settings
(1) Turn the printer on.
(2) Use WPS to connect the printer to the network.
Set your wireless access point to wait for a WPS connection, and then hold down the PAIR button on
the rear of the printer until the printer LED (blue) blinks.
When the WPS connection is made, the printer LED (blue) stops blinking and stays lit.
For details on WPS connections, see the
TSP100IIIW Online manual (Setup - Connecting
with a Tablet/PC).
(3) From the Windows Start menu, select “Programs / Apps / All apps” - “StarMicronics” - “LAN &
Bluetooth Setup Tool”.
(4) "User Account Control" window will appear. Click "Yes".
To Next Page
Loading...
