Software Manual
13
(7) The TSP100 LAN printer on the network and the paired TSP100 Bluetooth
®
printer are listed in the
printer list. If multiple TSP100IIIW printers are listed, click [Check connection] to check whether
you can communicate with the printer. The connected printer's LED (blue) will blink.
If you wish to use the IP address assigned by the DHCP server, then proceed to Section
1.3.2,
"Creating a Printer Queue", below.
If you wish to assign a fixed IP address for the printer, click [Configuration].
If the printer you want to install is not listed in the LAN printer list, go to “
When the printer is
not listed”.
Go to step 8
Go to section 1.3.2.
To Next Page
Loading...
