Software Manual
23
(6) The TSP100 LAN printer on the network and the paired TSP100 Bluetooth printer are listed in the printer
list. If multiple TSP100IIILAN printers are listed, click [Check connection] to check whether you can
communicate with the printer. The connected printer's LED (blue) will blink.
If you wish to use the IP address assigned by the DHCP server, then proceed to
Section 1.4.2, "Creating a
Printer Queue", below.
If you wish to assign a fixed IP address for the printer, click [Configuration].
If the printer you want to install is not listed in the LAN printer list, go to "
When the printer is not
listed".
Go to step 7
Go to section 1.4.2.
To Next Page
Loading...
