– 2 –
ENGLISH
5 Temporarily place the paper roll on
the printer cover. Be sure that the
roll is correctly oriented for load-
ing.
6 Pull on the green release bar so that
it unlocks, then tilt the print head
unit. Avoid touching the print head
with your fingers.
7 Insert the paper so that it passes
under the paper-guide roller shaft
and between the transmissive sen-
sors.
8 Push the paper until the edge moves
all the way through to the tear bar.
Fig. 1-4
Fig. 1-5
Fig. 1-6
Paper roll
Release bar
Print head unit
Paper guide
roller shaft
To Next Page
Loading...
