Star Micronics TSP400 Series - Page 54

– 51 –
APPENDIX
82mm
b
a
Printable width
26
Max. 36
Paper-feed
direction
lenhth of a Length of b
Line mode 3.5mm 75mm
Page mode 1mm 80mm
5. Print area
6. Black marking Print density: 1.2
Print position:
Marked side: Back (obverse of printable
side)
Mark dimensions: Width 10 ~ 20mm
(offset from center)
Length 3mm ~ 10mm
Positioning: Mark’s trailing end (rela-
tive to feed direction) iden-
tifies start position