Star Micronics TSP600 Series - Page 65

– 62 –
PAGE MODE
0
Constantly
set at 0 Vertical Parity error
1 : error
Framing error
1 : error
Mechanical error
1 : error
Paper empty
1 : empty
Buffer empty
1 : empty
Buffer overflow
1 : overflow
Compulsion switch
High level
(Switch is set to ON)
b7 b6 b5 b4 b3 b2 b1 b0
FUNCTION
Request status
CODE
<ENQ>
HEX
05
REMARKS
When the printer receives this command, the printer sends back a
status byte for the current printer condition immediately to the
host.
Note: Printer conditions are reported by the following status
bytes:
Status byte